To order this product you must be logged into your distributor account. Not yet a M+A distributor, but interested in becoming one? Fill out this form.

WaterHog Plus Mat

Product Number 185
WaterHog Plus mats are durable, stain-resistant mats with a unique bi-level design that traps dirt and moisture, keeping your floors clean, dry, and safe.  WaterHog Plus mats feature an attractive swirl pattern and are backed with 100% nitrile rubber making them commercially launderable.
  • Clean & Dry - Bi-level surface effectively scrapes dirt and moisture from shoes, trapping it beneath shoe level to prevent tracking; water dam border holds moisture keeping it off your floors (WaterHog mats can hold up to 1 1/2 gallons of water per square yard)
  • Durable - Reinforced rubber nubs prevent pile from crushing and extend the performance life of the mat
  • Fade & Stain-Resistant - Solution-dyed PET fabric (30 ounces/yard2) is resistant to staining, dries quickly, and will not fade or rot
  • Eco-Friendly - PET fabric is made from at least 90% recycled content reclaimed from plastic
  • Safe - Beveled edges provide a safe transition from floor to mat; certified high-traction by the National Floor Safety Institute (NFSI)
  • Available in 4 colors with a classic (rubber) border and durable 90-mil nitrile rubber backing

2' x 3' (23" x 35")
3' x 4' (35" x 45")
3' x 5' (35" x 58")
3' x 10' (35" x 116")
4' x 6' (45" x 69")
4' x 8' (45" x 96")
5' x 7' (58" x 83")
5' x 10' (58" x 117")
6' x 12' (70" x 142")

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

Material: Solution-dyed PET (polyethylene terephthalate); may contain up to 3% latex
Weight: 30 ounces/yard2
Construction: Needle-punched
Design: Swirl

Material: Nitrile rubber - smooth or universal cleated
Thickness: 90-mil

Overall Mat Thickness: 3/8 inch (0.375")


  • Passes DOC-FF1-70 for the surface flammability of carpets
  • Certified high-traction by the National Floor Safety Institute (NFSI)

WaterHog Plus mats can be commercially laundered (see laundering instructions) or cleaned using the instructions below:

  • Vacuum regularly (daily in high-traffic commercial areas; weekly in lower-traffic areas)
  • Extract or hose off as needed to remove heavy soil/debris
  • Hang mat to dry

Always make sure the mat is dry before placing it back in service.

To commercially launder your WaterHog Plus mat, please follow the instructions below.  This formula does not require drying, however the mats can be dried if necessary.

  1. Flush 2-3 minutes, high water level, 120 degrees F (49 degrees C)
  2. Break 5 minutes, high water level, 120 degrees F (49 degrees C)
  3. Rinse 2 minutes, high water level, 120 degrees F (49 degrees C)
  4. Rinse 2 minutes, high water level, 120 degrees F (49 degrees C)
  5. Extract (low speed) 2 minutes
  6. Shake out (rotate wheel at wash speed with drain open) 1 minute
  7. Extract (high speed max - 250 Gs) 3-5 minutes
  8. Lay mats flat following removal from washer.

If you dry mats in the dryer, allow to cool before rolling.