To order this product you must be logged into your distributor account. Not yet a M+A distributor, but interested in becoming one? Fill out this form.
WaterHog Inlay Logo Mat
- Clean & Dry - Bi-level surface effectively scrapes dirt and moisture from shoes, trapping it beneath shoe level to prevent tracking; water dam border holds moisture keeping it off your floors (WaterHog mats can hold up to 1 1/2 gallons of water per square yard)
- Durable & Fade Resistant - Reinforced rubber nubs prevent pile from crushing and extend the performance life of the mat; solution-dyed fabric is fade-resistant
- Safe - Beveled edges provide a safe transition from floor to mat; certified high-traction by the National Floor Safety Institute (NFSI)
- Eco-Friendly - Rubber backing contains 20% post-consumer recycled rubber from car tires
- 19 fabric colors to choose from
- Available with choice of classic (rubber) border or fashion (fabric) border
- Features 78-mil SBR rubber with choice of smooth or universal cleated backing
2' x 3' (23" x 35")
3' x 4' (35" x 45")
3' x 5' (35" x 58")
3' x 10' (35" x 116")
3' x 12' (35" x 142")
3' x 16' (35" x 189")
3' x 20' (35" x 236")
4' x 6' (45" x 69")
4' x 8' (45" x 96")
4' x 10' (45" x 116")
4' x 12' (45" x 142")
4' x 16' (45" x 189")
4' x 20' (45" x 236")
6' x 8' (70" x 97")
6' x 12' (70" x 144")
6' x 16' (70" x 189")
6' x 20' (70" x 236")
Available in special sizes with widths of 3' (35"), 4' (45"), and 6' (70") and whole foot lengths up to 20'.
Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
SURFACE
Material: 97% Solution-dyed polypropylene, 3% latex
Weight: 24 ounces/yard2
Construction: Needle-punched
Design: Squares
BACKING OPTIONS
Material: SBR rubber - smooth or universal cleated
Thickness: 78-mil (body thickness 78-mil; border thickness 143-mil)
Overall Thickness: 3/8 inch (0.3750")
STANDARDS & TESTING
- Passes CPSC FF 1-70 for the surface flammability of carpets
- Certified high-traction by the National Floor Safety Institute (NFSI)
WaterHog Inlay mats are produced using an inlay process, where colored material is cut and pieced together by hand before pressing into rubber. As a result, there are very strict design requirements for this product. PMS color matching is not available. White material should not be used as the background color or for large sections of the mat as it is difficult to keep the color clean.
Minimum Text Height: 3" (includes lower case text)
Minimum Line Thickness: 3/8"
Any space between letters or design elements must be at minimum 3/8"
The text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.
Gradients, tints, screens and transparencies are not supported and should not be used.
Mat Size Maximum Imprint Area Fashion
2' x 3' (23" x 35") 21" x 33" 20" x 32"
3' x 4' (35" x 45") 33" x 43" 32" x 42"
3' x 5' (35" x 58") 33" x 56" 32" x 55"
3' x 10' (35" x 116") 33" x 114" 32" x 113"
3' x 12' (35" x 142") 33" x 140" 32" x 139"
3' x 16' (35" x 189") 33" x 187" 32" x 186"
3' x 20' (35" x 236") 33" x 234" 32" x 233"
4' x 6' (45" x 69") 43" x 67" 42" x 66"
4' x 8' (45" x 96") 43" x 94" 42" x 93"
4' x 10' (45" x 116") 43" x 114" 42" x 113"
4' x 12' (45" x 142") 43" x 140" 42" x 139"
4' x 16' (45" x 189") 43" x 187" 42" x 186"
4' x 20' (45" x 236") 43" x 234" 42" x 233"
6' x 8' (70" x 97") 68" x 95" 67" x 94"
6' x 12' (70" x 144") 68" x 142" 67" x 141"
6' x 16' (70" x 189") 68" x 187" 67" x 186"
6' x 20' (70" x 236") 68" x 234" 67" x 233"
WaterHog Inlay mats can be cleaned using the following instructions:
- Vacuum regularly (daily in high-traffic commercial areas; weekly in lower-traffic areas)
- Extract or hose off as needed to remove heavy soil/debris
- Hang mat to dry
Always make sure the mat is dry before placing it back in service.
