To order this product you must be logged into your distributor account. Not yet a M+A distributor, but interested in becoming one? Fill out this form.

Traction Tread Mat

Product Number 50
Traction Tread mats are designed to provide slip-resistant floor protection in a variety of settings.
  • Slip-Resistant & Safe - Certified high-traction by the National Floor Safety Institute (NFSI)
  • Durable - 1/8" solid nitrile rubber provides years of service life and will not crack or curl
  • Versatile - Grease/oil proof; chemical resistant; welding safe
  • ESD rating of electrically conductive

Recommended for use in commercial and industrial settings that require additional slip resistance or floor protection.

2' x 3' (23" x 32")
3' x 5' (32" x 58")
3' x 9' (32" x 108")
3' x 12' (32" x 143")
4' x 6' (46" x 70")
4' x 9' (46" x 108")
4' x 12' (46" x 143")

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.


Material: Solid nitrile rubber
Thickness: 1/8 inch (0.125")


  • Passes Flammability - BS 4790 Metal Nut Method
  • Certified high-traction by the National Floor Safety Institute (NFSI)
  • ASTM C1028-96 static coefficient of friction:
  •     Dry 0.97
        Wet 0.93
  • ESD rating: electrically conductive
  • Melt point over 500 degrees F.  Tested at temperatures up to 1800 degrees F for welding/slag resistance  

Traction Tread mats can be cleaned using the instructions below:

  • Scrubbing with a deck brush (when needed)
  • Using detergent with a neutral pH
  • Rinsing with a hose or pressure washer
  • Mat should be laid flat or hung to dry

Always make sure the mat is dry before placing it back in service.