To order this product you must be logged into your distributor account. Not yet a M+A distributor, but interested in becoming one? Fill out this form.

Hog Heaven Impressions Logo Mat

Product Number 3422
Hog Heaven Impressions mats feature the same excellent anti-fatigue qualities of a standard Hog Heaven mat but can be customized with your logo or message.
  • Comfortable - 5/8" high-density nitrile-blended cushion helps eliminate pressure to the lower back and legs, providing superior comfort
  • Safe - Certified high-traction by the National Floor Safety Institute (NFSI); edges will not crack or curl and provide a safe transition from floor to mat
  • Durable - Nitrile-blended cushion provides years of useful service life; cushion is molded, not glued, to the nitrile rubber surface so it will not separate
  • Versatile - Nitrile rubber surface is welding safe; grease/oil proof*; chemical resistant

*Please note that the polymetric film with your logo/imprint will be less resistant to elements than the mat.

Recommended for indoor use in commercial and industrial settings where branding or messaging is required/preferred along with the anti-fatigue benefits of a Hog Heaven mat. Excellent for customization with a company logo, slogan, or safety and quality reminders.

2' x 3' (23" x 32")
3' x 5' (32" x 58")
3' x 12' (32" x 143")
4' x 6' (46" x 70")

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

SURFACE
Material: Nitrile rubber
Logo/Image Material: Polymetric film

CUSHION
Material: High-density, closed-cell nitrile/PVC-blended foam 

OVERALL MAT THICKNESS: 5/8 inch (0.6250" ) 

STANDARDS & TESTING

  • Durometer: 56
  • Compression Deflection: 
         40% at 20 psi
         55% at 40 psi 
  • Certified high-traction by the National Floor Safety Institute (NFSI)
  • Passes flammability standard DOC-FF1-70
  • Passes AATCC test method 134-1996
  • Water absorption ASTM D 1667 (0.01 pounds/foot2 maximum)
  • Temperature use ASTM D 1056: cold crack -20? F
  • Melt point over 500 degrees F. Tested at temperatures up to 1800 degrees F for welding/slag resistance (specific results from test available upon request)

A digital print on polymetric film allows customers to customize the Hog Heaven anti-fatigue mat with logos, images, and messages. PMS colors may be matchedfor an additional one-time fee.*

Minimum Text Height: 1/4"
Minimum Line Thickness: 1/16"
These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.

Mat Size                             Maximum Imprint Area
2' x 3' (24" x 32")                    12" x 22"
3' x 5' (32" x 58")                    24" x 44"
3' x 12' (32" x 142")                    24" x 120"
4' x 6' (46" x 70")                    36" x 50"

*We will do our best to match a PMS color, however, color matching can be extremely challenging.  Although we can get close, color is never an exact science and variations will occur.  An exact color match is vulnerable to many factors, including the fact that we use a hot press to combine the rubber surface and cushion backing.  Heat from the press often causes the color to lighten. Typically, we can get close to most PMS colors, but the final color may be a few shades off.  For the PMS color to be as close as possible, we require additional time to create the proof sketch.  Specific PMS colors may be matched for a one-time additional fee of $270.38 per PMS color. 

Hog Heaven mats can be cleaned by scrubbing with a deck brush (when needed), using detergent with a neutral pH, and rinsing with a hose or pressure washer.  Mats should be laid flat or hung to dry.