To order this product you must be logged into your distributor account. Not yet a M+A distributor, but interested in becoming one? Fill out this form.

Berber Roll Goods

Product Number 2281 (full roll), 2282 (custom sizes)
Berber Roll Goods are ideal for large areas or custom applications and feature heavy polypropylene fabric with a high-performance rubber backing.
  • Durable - Heavy 52-ounce solution-dyed fabric is stain resistant and has excellent light fastness; tough enough for outdoor use
  • Safe - High-performance rubber backing helps hold the mat in place to minimize slipping hazards
  • Attractive - Loop pile "berber" construction features a hobnail design for an upscale look
  • Easy to Clean - Polypropylene fabric (52 ounces/square yard) is naturally resistant to staining and fading
  • Customizable - In addition to being available in custom sizes, this product can be made with your custom logo inlayed (no setup fees)
  • 3/8" thick and available in 17 colors to match any d├ęcor
  • Designed to be installed like carpeting or loose-laid like a mat; available with singed borders or vinyl nosing (sold separately)

Recommended for use in large commercial entryways, especially in the retail and hospitality industries. The tight weave of Berber makes it resistant to damage from golf shoes and ideal for use in clubs and other locations where spiked footwear may be worn by guests or employees.

6' x 125' roll
12' x 125' roll

Custom sizes are available in widths from 3' to 12' and lengths up to 50'.  Please note that widths over 6' may be seamed based on material availability.

SURFACE
Fiber: Solution-dyed polypropylene
Weight: 52 ounces/yard2
Construction: Needle-punched
Design: Hobnail

BACKING
Material: Performance rubber

OVERALL MAT THICKNESS: 3/8 inch (0.375")

STANDARDS & TESTING

  • Passes DOC-FF1-70 for the surface flammability for the surface of carpets

Berber Roll Goods mats should be vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications). They can also be cleaned with an extractor or hosed off as necessary to remove heavy soil.  Hang dry and always make sure they are dry before placing them back in service.

Measure
Determine the number of square feet that you will need. Measure the length and width of the area you wish to cover. Multiply the width by the length to get the square footage of the space. For areas that are not rectangular, break the area into smaller rectangles. Multiply the width times the length for each of the smaller rectangles separately, and add up all the results to arrive at the overall square footage.

Prepare
Remove any old floor coverings, debris, and adhesives from the floor. Clean the entire floor surface of any dust, drywall mud, etc. Once the floor has been cleaned, allow it to dry completely. Allow the matting material to sit in the area uninstalled for several hours so it can acclimate to room temperature prior to installation.

Install
Apply your adhesive to the prepared floor according to the adhesive manufacturer's directions. We recommend CA024 multi-purpose solvent-free adhesive for all installations both indoor and outdoor. Never use an adhesive that contains solvents. Similar to laying carpet, roll the matting out over the installation area and carefully trim the excess material around the perimeter using a utility knife.