To order this product you must be logged into your distributor account. Not yet a M+A distributor, but interested in becoming one? Fill out this form.

Comfort Flow HD Modular Tiles

Product Number 4430
Comfort Flow HD Tiles are flow-through modular tiles with excellent anti-fatigue properties designed for wet areas where grease, oil, and chemicals may be present.
  • Safe - Beveled edges provide a safe transition from floor to mat; drainage holes allow liquid to flow through
  • Comfortable - High-density closed-cell nitrile rubber cushion provides excellent anti-fatigue qualities
  • Versatile - Grease and oil proof; chemical resistant; welding safe
  • Easy to Clean - Lightweight flexible design ensures easy handling and cleaning
  • Tiles can be linked to create custom configurations

Recommended for indoor/outdoor use in wet or dry commercial and industrial environments.

18" Corner Tile: 19.125" x 19.125"
18" Side Tile: 18" x 19.125"
18" Middle Tile: 18" x 18"

36" Corner Tile: 37.375" x 37.375"
36" Side Tile: 36" x 37.375"
36" Middle Tile: 36" x 36"

CONSTRUCTION
Material: Nitrile rubber
Thickness: 1/2 inch (0.500")

STANDARDS & TESTING

  • Passes flammability standard DOC-FF1-70
  • Compression Deflection:
          13.4% at 20 psi
          22.6% at 40 psi
  • ASTM C1028-96 static coefficient of friction:
         Dry 0.87
         Wet 0.88
  • ESD Rating of electrically conductive:
          Surface to surface 50% relative humidity 4.6 x 10^4 ohms
          Surface to surface 12% relative humidity 6.2 x 10^4 ohms

Comfort Flow HD mats/tiles can be cleaned in several different ways. They can be sterilized in an autoclave, washed in a commercial dishwasher, or washed by hand using the following instructions:

  1. Scrub with a deck brush (as needed) using a detergent with a neutral pH.
  2. Rinse with a hose or pressure washer.
  3. Hang to dry.

There are three components in the Comfort Flow HD Tile System: the corner tile, the side tile, and the middle tile.

The corner tile has a border on two adjacent sides.
The side tile has a border on one side.
The middle tile has no borders.

  1. Start with a corner tile and attach as many side tiles as needed to complete the width of the installation, ending with another corner tile.
  2. Beginning at the corner tile, attach as many side tiles as needed to complete the length of the installation, ending with another corner tile.
  3. Beginning in one corner, fill in the remaining center space with as many middle tiles as needed to complete the installation.